Certified to NSF / ANSI Standard 61
  • Body FDA / POM (Polyacetal,
    Polyoxy Methylene)
  • O-Ring / Nitrile (NBR)
  • Collet / Polyoxy Methylene & SS Teeth
  • Maximum 150 psi (10 bar)
    @ 70 °F (20 °C)
  • Maximum 60 psi (4 bar)
    @ 140 °F (60 °C)
  • Minimum 33 °F (1 °C)
  • 1⁄4” & 3⁄8” – 230 psi @ 70 °F
    (15 bar @ 20 °C)
    Maximum – 120 psi @ 150 °F
    (8 bar @ 65 °C)
  • 1⁄2” – 150 psi @ 70 °F (10 bar @ 20 °C)
    Maximum – 90 psi @ 150 °F
    (6 bar @ 65 °C)
Outside Diameter Inside Diameter
1⁄4” 0.160”
3⁄8” 0.250”
1⁄2” 0.37”
Threads Max. Diameter
1⁄4” 1.0 ft/lb (1.5 Nm)
3⁄8” 2.2 ft/lb (3.0 Nm)
1⁄2” 2.2 ft/lb (3.0 Nm)

Potable Water Applications

HYDROFIT™ Tubing is suitable for potable water applications with a maximum chlorine content of 4ppm (parts per million).  Water heated above 70°F (20°C) and/or pressure above the rated maximum pressures will significantly reduce the service life. Avoid direct exposure to sunlight.  Direct exposure to sunlight will also reduce its service life and may lead to failure.  It is commonly known and good practice to inspect tubing and fittings regularly.  Should there be evidence of damage, color change, cracking or hardening, fittings and tubing should be replaced immediately.  All fitting and tubing should not be used near heat emitting appliances. Note: Hot and Cold water plumbing systems MUST comply with local plumbing code for pipe and fittings. Frequent visual inspections are advisable. Frequency should be predicated on the severity of the application, risk of failure or when failure could result in unacceptable downtime, damage or injury risk. Keep away from contact with ANY chemicals or aggressive liquids.

Chemical Compatibiliy

Chemical Compatibility: HYDROFIT™ – Quick Connect Fittings can be used on liquids other than potable water. We recommend that you consult with our Chemical Compatibility Chart to determine if they can be utilized under your specifications. You may also contact us to further verify compatibility.

Food Quality

HYDROFIT™ Fittings and Tubing are produced with Food and Drug Administration (FDA CFR 21 177.2470 and 177.2600) approved material and can be used in food quality applications.

Side Loads

HYDROFIT™ Fittings Should not be exposed to excessive side loads.  They should not be used to support brackets or other components and extreme caution should be taken during shipping and transportation to prevent undue stress and excessive side loading. 

Suitability

It is the customers responsibility to gauge and ensure that HYDROFIT™ Fittings and Tubing are suitable for their specific application and variable parameters. Plug in Style Fittings may not be used with compression fittings of any kind.

Responsibility of Use

While HYDROFIT™ gives a warranty against defects in manufacture and materials, it is the responsibility of the user/installer to ensure that all fittings and tubing  are suitable for their application. The installation must be carried out correctly  and comply with recognized codes and national standards. All connections must  be properly maintained.

Installation and System Testing

Fittings and tubing installations should be pressure tested and each connection inspected by pushing and pulling on the connection points prior to handing over to final user.

HYDROFIT™ – Quick Connect Fittings

are designed to provide all the typical benefits and ease of use of a quick connect fitting while providing an user friendly ergonomically pleasing design. HYDRO FIN DESIGN handles are ergonomically designed, offer ease of use, and provide a smoother valve rotation.

HYDROFIT™ – Quick Connect Fittings

are designed to meet strict market requirements and are manufactured under precise tolerance levels, making them suitable for food and water use.

HYDROFIT™ – Quick Connect Fittings

are manufactured using FDA approved materials and are certified by NSF to NSF/ANSI standards 61.

HDF-MC | MALE CONNECTOR SPECIFICATIONS
Part Number Description Bag Box
HDF-MC0402 1⁄4” Tube x 1⁄8” MNPT, Male Connector 10 500
HDF-MC0404 1⁄4” Tube x 1⁄4” MNPT, Male Connector 10 400
HDF-MC0406 1⁄4” Tube x 3⁄8” MNPT, Male Connector 10 400
HDF-MC0604 3⁄8” Tube x 1⁄4” MNPT, Male Connector 10 300
HDF-MC0606 3⁄8” Tube x 3⁄8” MNPT, Male Connector 10 250
HDF-MC0608 3⁄8” Tube x 1⁄2” MNPT, Male Connector 10 250
HDF-MC0806 1⁄2” Tube x 3⁄8” MNPT, Male Connector 10 200
HDF-MC0808 1⁄2” Tube x 1⁄2” MNPT, Male Connector 10 200

 

HDF-FC | FEMALE CONNECTOR SPECIFICATIONS
Part Number Description Bag Box
HDF-FC0404 1⁄4” Tube x 1⁄4” FNPT, Female Connector 10 350
HDF-FC0408 1⁄4” Tube x 1⁄2” FNPT, Female Connector 10 200
HDF-FC0412 1⁄4” Tube x 3⁄4” FNPT, Female Connector 10 200
HDF-FC0606 3⁄8” Tube x 3⁄8” FNPT, Female Connector 10 200
HDF-FC0608 3⁄8” Tube x 1⁄2” FNPT, Female Connector 10 200
HDF-UC | UNION CONNECTOR SPECIFICATIONS
Part Number Description Bag Box
HDF-UC04 1⁄4” Tube x 1⁄4” Tube, Union Connector 10 400
HDF-UC06 3⁄8” Tube x 3⁄8” Tube, Union Connector 10 300
HDF-UC0604 3⁄8” Tube x 1⁄4” Tube, Reducing Union 10 300
HDF-BU | BULKHEAD UNION SPECIFICATIONS
Part Number Description Bag Box
HDF-BU04 1⁄4” Tube x 1⁄4” Tube, Bulkhead Union 10 300
HDF-BU06 3⁄8” Tube x 3⁄8” Tube, Bulkhead Union 10 180
HDF-BU0604 3⁄8” Tube x 1⁄4” Tube, Bulkhead Union 10 180
HDF-BF | BRASS CONNECTOR SPECIFICATIONS
Part Number Description Bag Box
HDF-BF0404 1⁄4” Tube x 1⁄4” Female Flare, Brass Connector 10 150
HDF-BF0604 3⁄8” Tube x 1⁄4” Female Flare, Brass Connector 10 150
HDF-BF0606 3⁄8” Tube x 3⁄8” Female Flare, Brass Connector 10 100
HDF-BF0412 1⁄4” Tube x 3⁄4” Female National Hose Connector 10 100
HDF-FE | FIXED ELBOW SPECIFICATIONS
Part Number Description Bag Box
HDF-FE0402 1⁄4” Tube x 1⁄8” MNPT, Fixed Elbow 10 500
HDF-FE0404 1⁄4” Tube x 1⁄4” MNPT, Fixed Elbow 10 400
HDF-FE0406 1⁄4” Tube x 3⁄8” MNPT, Fixed Elbow 10 300
HDF-FE0604 3⁄8” Tube x 1⁄4” MNPT, Fixed Elbow 10 300
HDF-FE0606 3⁄8” Tube x 3⁄8” MNPT, Fixed Elbow 10 250
HDF-FE0608 3⁄8” Tube x 1⁄2” MNPT, Fixed Elbow 10 250
HDF-FE0808 1⁄2” Tube x 1⁄2” MNPT, Fixed Elbow 10 150
HDF-UE | UNION ELBOW SPECIFICATIONS
Part Number Description Bag Box
HDF-UE04 1⁄4” Tube x 1⁄4” Tube, Union Elbow 10 400
HDF-UE06 3⁄8” Tube x 3⁄8” Tube, Union Elbow 10 250
HDF-UE0604 3⁄8” Tube x 1⁄4” Tube, Union Elbow 10 250
HDF-ICV | INLINE CHECK VALVE SPECIFICATIONS
Part Number Description Bag Box
HDF-ICV04 1⁄4” Tube x 1⁄4” Tube, Inline Check Valve 10 300
HDF-ICV06 3⁄8” Tube x 3⁄8” Tube, Inline Check Valve 10 150
HDF-ECV | ELBOW CHECK VALVE SPECIFICATIONS
Part Number Description Bag Box
HDF-ECV0402 1⁄4” Tube x 1⁄8” MNPT, Elbow Check Valve 10 500
HDF-MBT | MALE BRANCH TEE SPECIFICATIONS
Part Number Description Bag Box
HDF-MBT0404 1⁄4” Tube x 1⁄4” MNPT, x 1⁄4” Tube, Male Branch Tee 10 300
HDF-MBT0606 3⁄8” Tube x 3⁄8” MNPT, x 3⁄8” Tube, Male Branch Tee 10 200
HDF-MBT060604 3⁄8” Tube x 3⁄8” MNPT, x 1⁄4” Tube, Male Branch Tee 10 200
HDF-SBT | STEM BRANCH TEE SPECIFICATIONS
Part Number Description Bag Box
HDF-SBT0404 1⁄4” Tube x 1⁄4” Stem x 1⁄4” Tube, Stem Branch Tee 10 300
HDF-SBT0606 3⁄8” Tube x 3⁄8” Stem x 3⁄8” Tube, Stem Branch Tee 10 150
HDF-UT | UNION TEE SPECIFICATIONS
Part Number Description Bag Box
HDF-UT04 1⁄4” Tube x 1⁄4” Tube x 1⁄4” Tube, Union Tee 10 300
HDF-UT06 3⁄8” Tube x 3⁄8” Tube x 3⁄8” Tube, Union Tee 10 150
HDF-UT0406 1⁄4” Tube x 1⁄4” Tube x 3⁄8” Tube, Union Tee 10 150
HDF-UT0604 3⁄8” Tube x 3⁄8” Tube x 1⁄4” Tube, Union Tee 10 150
HDF-SRT | STEM RUN TEE SPECIFICATIONS
Part Number Description Bag Box
HDF-SRT0404 1⁄4” Tube x 1⁄4” Tube x 1⁄4” Stem Run Tee 10 300
HDF-SRT0606 3⁄8” Tube x 3⁄8” Tube x 3⁄8” Stem Run Tee 10 200
HDF-MRT | MALE RUN TEE SPECIFICATIONS
Part Number Description Bag Box
HDF-MRT0404 1⁄4” Tube x 1⁄4” Tube x 1⁄4” MNPT, Male Run Tee 10 300
HDF-MRT060404 3⁄8” Tube x 1⁄4” Tube x 1⁄4” MNPT, Male Run Tee 10 200
HDF-MRT060604 3⁄8” Tube x 3⁄8” Tube x 1⁄4” MNPT, Male Run Tee 10 200
HDF-TW | TWO-WAY DIVIDER SPECIFICATIONS
Part Number Description Bag Box
HDF-TW04 1⁄4” Tube x 1⁄4” Tube x 1⁄4” Tube, Two Way Divider 10 300
HDF-TW06 3⁄8” Tube x 3⁄8” Tube x 3⁄8” Tube, Two Way Divider 10 120
HDF-MSA | MALE STEM ADAPTOR SPECIFICATIONS
Part Number Description Bag Box
HDF-MSA0404 1⁄4” Stem x 1⁄4” Male MNPT, Male Stem Adaptor 10 500
HDF-MSA0604 3⁄8” Stem x 1⁄4” Male MNPT, Male Stem Adaptor 10 400
HDF-MSA0606 3⁄8” Stem x 3⁄8” Male MNPT, Male Stem Adaptor 10 300
HDF-SC | STEM CONNECTOR SPECIFICATIONS
Part Number Description Bag Box
HDF-SC0604 3⁄8” Stem x 1⁄4” Tube, Stem Connector 10 300
HDF-FF | FAUCET FITTINGS SPECIFICATIONS
Part Number Description Bag Box
HDF-FF04 1⁄4” Tube x 7⁄16” -24 UNS, Faucet Fitting 10 300
HDF-FF06 3⁄8” Tube x 7⁄16” -24 UNS, Faucet Fitting 10 300
HDF-PE | PLUG IN ELBOW SPECIFICATIONS
Part Number Description Bag Box
HDF-PE0404 1⁄4” Stem x 1⁄4” Tube, Plug In Elbow 10 500
HDF-PE0406 1⁄4” Stem x 3⁄8” Tube, Plug In Elbow 10 300
HDF-PE0604 3⁄8” Stem x 1⁄4” Tube, Plug In Elbow 10 300
HDF-PE0606 3⁄8” Stem x 3⁄8” Tube, Plug In Elbow 10 300
WNV | FEED WATER ADAPTOR SPECIFICATIONS
Part Number Description Bag Box
WNV-3 1⁄2” FNPT x 1⁄2” MNPT x 1⁄4” Tube, Feed Water Adaptor 1 500
WNV-4 1⁄2” FNPT x 1⁄2” MNPT x 3⁄8” Tube, Feed Water Adaptor 1 500
HDF-ASVA | ANGLE STOP VALVE ADAPTOR SPECIFICATIONS
Part Number Description Bag Box
HDF-ASVA-14 3⁄8” Thread x 1⁄4” Tube (with 1⁄2” Adaptor) 1 200
HDF-ASVA-38 3⁄8” Thread x 3⁄8” Tube (with 1⁄2” Adaptor) 1 200
HDF-BVCV | BALL VALVE WITH CHECK VALVE SPECIFICATIONS
Part Number Description Bag Box
HDF-BVCV04 1⁄4” Tube x 1⁄4” Tube, Inline Check Ball Valve 10 100
HDF-BVI | INLINE BALL VALVE SPECIFICATIONS
Part Number Description Bag Box
HDF-BVI04 1⁄4” Tube x 1⁄4” Tube, Inline Ball Valve 10 150
HDF-BVI06 3⁄8” Tube x 3⁄8” Tube, Inline Ball Valve 10 100
HDF-BVI0604 3⁄8” Tube x 1⁄4” Tube, Inline Ball Valve 10 100
HDF-BVM | MALE BALL VALVE SPECIFICATIONS
Part Number Description Bag Box
HDF-BVM0404 1⁄4” Tube x 1⁄4” MNPT, Male Ball Valve 10 150
HDF-BVM0606 3⁄8” Tube x 3⁄8” MNPT, Male Ball Valve 10 100
HDF-BVT | TANK BALL VALVE SPECIFICATIONS
Part Number Description Bag Box
HDF-BVT0404 1⁄4” Tube x 1⁄4” FNPT, Female Tank Ball Valve 10 120
HDF-BVT0604 3⁄8” Tube x 1⁄4” FNPT, Female Tank Ball Valve 10 100
HDF-STH | HOSE BARB CONNECTOR SPECIFICATIONS
Part Number Description Bag Box
HDF-STH0406 1⁄4” Stem x 3⁄8” Hose Barb Connector 10 500
HDF-STH06 3⁄8” Stem x 3⁄8” Hose Barb Connector 10 500
HDF-ESTH | HOSE BARB ELBOW CONNECTOR SPECIFICATIONS
Part Number Description Bag Box
HDF-ESTH04 1⁄4” Stem x 1⁄4” Hose Barb Elbow Connector 10 200
HDF-ESTH06 3⁄8” Stem x 3⁄8” Hose Barb Elbow Connector 10 200
HDF-TBC | BEND CLIP SPECIFICATIONS
Part Number Description Bag Box
HDF-TBC06 3⁄8” Tubing, Bend Clip 10 300
HDF-PG | PLUG SPECIFICATIONS
Part Number Description Bag
HDF-PG04WH 1⁄4” Plug-White 10
HDF-PG06WH 3⁄8” Plug-White 10
HDF-ES | END STOP SPECIFICATIONS
Part Number Description Bag Box
HDF-ES04 1⁄4” End Stop 10 500
HDF-TIR | RESTRICTOR SPECIFICATIONS
Part Number Description Bag
HDF-TIR150 150 CC Tube Insert Restrictor – White 10
HDF-TIR220 220 CC Tube Insert Restrictor – Blue 10
HDF-TIR300 300 CC Tube Insert Restrictor – Green 10
HDF-TIR430 430 CC Tube Insert Restrictor – Natural 10
HDF-TIR550 550 CC Tube Insert Restrictor – Pink 10
HDF-TIR800 800 CC Tube Insert Restrictor – Yellow 10
HDF-TIR1200 1200 CC Tube Insert Restrictor – Orange 10
HDF-TIR1600 1600 CC Tube Insert Restrictor – Red 10
HDF-TIR2000 2000 CC Tube Insert Restrictor – Purple 10

 

HDF-CT | COLLET SPECIFICATIONS
Part Number Description Bag
HDF-CT04 1⁄4” Collet – White 10
HDF-CT06 3⁄8” Collet – White 10
HDF-LC | LOCKING CLIP SPECIFICATIONS
Part Number Description Bag
HDF-LC04R 1⁄4” Locking Clip – Red 10
HDF-LC06R 3⁄8” Locking Clip – Red 10
HDF-ORING | O-RING SPECIFICATIONS
Part Number Description Bag
HDF-04ORING 1⁄4” O-Ring 10
HDF-06ORING 3⁄8” O-Ring 10
HDF-08ORING 1⁄2” O-Ring 10
HDF-TC | TUBE CUTTER SPECIFICATIONS
Part Number Description Bag
HDF-TC Tube Cutter 1
PT04 | 1⁄4” POLYETHYLENE TUBING (500 FT ROLLS) SPECIFICATIONS
Part Number Description Box
PT04-BK-0500 1⁄4” Polyethylene Tube – Black 2
PT04-BL-0500 1⁄4” Polyethylene Tube – Blue 2
PT04-GN-0500 1⁄4” Polyethylene Tube – Green 2
PT04-NA-0500 1⁄4” Polyethylene Tube – Natural 2
PT04-OG-0500 1⁄4” Polyethylene Tube – Orange 2
PT04-RD-0500 1⁄4” Polyethylene Tube – Red 2
PT04-WH-0500 1⁄4” Polyethylene Tube – White 2
PT04-YL-0500 1⁄4” Polyethylene Tube – Yellow 2
PT06 | 3⁄8” POLYETHYLENE TUBING (500 FT ROLLS) SPECIFICATIONS
Part Number Description Box
PT06-BK-0500 3⁄8” Polyethylene Tube – Black 1
PT06-BL-0500 3⁄8” Polyethylene Tube – Blue 1
PT06-NA-0500 3⁄8” Polyethylene Tube – Natural 1
PT06-RD-0500 3⁄8” Polyethylene Tube – Red 1
PT06-WH-0500 3⁄8” Polyethylene Tube – White 1
PT08 | 1⁄2” POLYETHYLENE TUBING (250 FT ROLLS) SPECIFICATIONS
Part Number Description Box
PT08-BK-0250 1⁄2” Polyethylene Tube – Black 1
PT08-BL-0250 1⁄2” Polyethylene Tube – Blue 1
PT08-NA-0250 1⁄2” Polyethylene Tube – Natural 1
PT08-WH-0250 1⁄2” Polyethylene Tube – White 1