This housing is tested and Certified by NSF International against NSF / ANSI Standard 42 for materials and structural integrity requirements.
Component
  • Reverse Osmosis
  • Residential Plumbing
  • Photography
  • Beverage
  • Ice maker
  • Misting Units
  • Opaque Housing: Polypropylene
  • Clear Housing: San
  • Cap: Polypropylene
  • O-Ring: EPDM
  • Maximum Temperature: 125 °F (51.7 °C)
  • Maximum Pressure: 75 psi (5.17 bar)

Hydronix HF3 Series Slim Rib Cap Filter Housings

are available in a variety of colors and are made to house 2.5” diameter cartridges. Most 9 78” and 10” cartridges fit easily and caps are available in 14”, 38”, 12” and 34”female NPT ports.

Hydronix HF3 Series Slim Rib Cap Filter Housings

are ideal for typical applications as pre and post-filtration for RO systems, under sink filters, countertop systems, ice machines, food service and other applications.

Hydronix HF3 Series Slim Rib Cap Filter Housings

have pressure relief (PR) buttons available for 12” and 14” port housings.

HF3 SERIES SPECIFICATIONS
Part Number Description Case Quantity Box Dimension (Inches) Weight (lbs) Weight (kgs)
5″ BODY HF3-5WHWH14 NSF 5” White Body, White Rib Cap 14 15 8” x 14” x 21” 13 5.90
HF3-5WHWH38 NSF 5” White Body, White Rib Cap 38 15 8” x 14” x 21” 13 5.90
HF3-5WHWH12 NSF 5” White Body, White Rib Cap 12 15 8” x 14” x 21” 13 5.90
HF3-5CLWH14 5” Clear Body, White Rib Cap 14 15 8” x 14” x 21” 13 5.90
HF3-5CLWH38 5” Clear Body, White Rib Cap 38 15 8” x 14” x 21” 13 5.90
HF3-5CLWH12 5” Clear Body, White Rib Cap 12 15 8” x 14” x 21” 13 5.90
10”
14” PORT
HF3-10WHWH14 NSF 10” White Body, White Rib Cap 14 12 8” x 14” x 21” 30 13.61
HF3-10BLBK14 NSF 10” Blue Body, Black Rib Cap 14 12 8” x 14” x 21” 30 13.61
HF3-10CLWH14 10” Clear Body, White Cap 14 12 8” x 14” x 21” 30 13.61
HF3-10CLBK14 10” Clear Body, Black Cap 14 12 8” x 14” x 21” 30 13.61
10”
38” PORT
HF3-10WHWH38 NSF 10” White Body, White Rib Cap 38 12 8” x 14” x 21” 30 13.61
HF3-10BLBK38 NSF 10” Blue Body, Black Rib Cap 38 12 8” x 14” x 21” 30 13.61
HF3-10CLWH38 10” Clear Body, White Rib Cap 38 12 8” x 14” x 21” 30 13.61
HF3-10CLBK38 10” Clear Body, Black Rib Cap 38 12 8” x 14” x 21” 30 13.61
10”
12” PORT
HF3-10WHWH12 NSF 10” White Body, White Rib Cap 12 12 8” x 14” x 21” 30 13.61
HF3-10WHWH12PR NSF 10” White Body, White Rib Cap 12”, PR 12 8” x 14” x 21” 30 13.61
HF3-10BLBK12 10” Blue Body, Black Rib Cap 12 12 8” x 14” x 21” 30 13.61
HF3-10BLBK12PR 10” Blue Body, Black Rib Cap 12”, PR 12 8” x 14” x 21” 30 13.61
HF3-10CLWH12 10” Clear Body, White Rib Cap 12 12 8” x 14” x 21” 30 13.61
HF3-10CLWH12PR 10” Clear Body, White Rib Cap 12”, PR 12 8” x 14” x 21” 30 13.61
HF3-10CLBK12 10” Clear Body, Black Rib Cap 12 12 8” x 14” x 21” 30 13.61
HF3-10CLBK12PR 10” Clear Body, Black Rib Cap 12”, PR 12 8” x 14” x 21” 30 13.61
10”
34” PORT
HF3-10WHWH34 NSF 10” White Body, White Rib Cap 34 12 8” x 14” x 21” 30 13.61
HF3-10WHWH34PR NSF 10” White Body, White Rib Cap 34”, PR 12 8” x 14” x 21” 30 13.61
HF3-10BLBK34 10” Blue Body, Black Rib Cap 34 12 8” x 14” x 21” 30 13.61
HF3-10BLBK34PR 10” Blue Body, Black Rib Cap 34”, PR 12 8” x 14” x 21” 30 13.61
HF3-10CLWH34 10” Clear Body, White Rib Cap 34 12 8” x 14” x 21” 30 13.61
HF3-10CLWH34PR 10” Clear Body, White Rib Cap 34”, PR 12 8” x 14” x 21” 30 13.61
HF3-10CLBK34 10” Clear Body, Black Rib Cap 34 12 8” x 14” x 21” 30 13.61
HF3-10CLBK34PR 10” Clear Body, Black Rib Cap 34”, PR 12 8” x 14” x 21” 30 13.61
O-Ring HF2/3 ORING O-Ring for HF2, 3 Filter Housing

* For the complete list of our NSF Certified products, please visit the Hydronix Water Technology page on the official NSF website: www.nsf.org

WARNING: READ THESE INSTRUCTIONS BEFORE CHANGING OR INSTALLING. FOLLOW THESE INSTRUCTIONS TO REDUCE RISK OF DANGER.CAUTION: Filter housing must be protected against freezing and extreme temperatures. Filter housings should not be in direct contact with sunlight for a prolonged period of time since uv rays can make housings brittle. Pressure should always be measured before installation and water pressure regulators should be installed in the main line or in front of the housing if water pressure exceeds manufacturers’ maximum water pressure: 75 psi. Installers should make sure filters and replacement filters are the correct length and are not too long so as to not cause undo strain and stress on the housing. A leak detector must be installed on all installations where high pressure, water hammer and pressure spikes are known or suspected to be present and on all installations where pressure is over 60 psi. Failure to the above may result in cracking of the filter housing, water leakage and water damage. Caution: All filtration systems contain other parts that have a limited service life. Exhaustion of the service life of those parts often cannot be easily detected. Commonly, it is only after leakage has been observed or water damage has occurred that one is made aware that the service life has been exhausted. Important notice: To prevent costly repairs or possible water damage we strongly recommend that the bowl or sump of all plastic housings be replaced periodically: every 5 years for clear sumps, and every 4 years for opaque sumps. If your sump has been in use for more than the recommended period, it should be replaced immediately. Be sure to date any new or replacement sump for future reference and indicate the next recommended replacement date.
WARRANTY: Limited three (3) year warranty from the date of sale for material defects only. Warranty is limited to repair or replacement of product only. Any misuse, misinstallation, lack of maintenance,
exceeding maximum pressure or failure to follow these instructions will void limited warranty.
DISCLAIMER OF WARRANTIES: Except as expressly warranted in writing by Hydronix water technology, the goods sold by Hydronix water technology are purchased by the buyer ”as is.” Hydronix water technology does not warrant that the goods are of merchantable quality or that they can be used for any particular purpose. Except as expressly warranted in writing by Hydronix water technology, Hydronix water technology makes no representation or warranty of any kind with respect to the products.
LIMITATION OF LIABILITY: In no event shall Hydronix water technology be liable to the purchaser or any other entity for more than the invoice price received by Hydronix water technology for any non-conforming products. Hydronix water technology shall not be liable to the purchaser or any other entity for personal injury, property damage, or any direct, indirect, special, incidental, consequential, punitive, exemplary, or other damages of any kind, including without limitation the cost of procurement of substitute goods, the loss of profits, products, or production, or the interruption of business, however caused and on any theory of liability, and whether or not Hydronix water technology has been advised of the possibility of such damages. The essential purpose of this provision is to limit the liability of Hydronix water technology arising out of the sale of products to the purchaser whether for breach of contract, negligence, or otherwise. These limitations shall apply notwithstanding any failure of essential purpose of any limited remedy and notwithstanding the provisions of any other agreement between Hydronix water technology and the purchaser.