• Housing: 304 or 316 Stainless Steel
  • Closure: Stainless Steel
  • O-Rings: EPDM (FDA Grade
  • 150 PSI at 200 °F (10.34 BAR at 93.33 °C)
  • Electro polishing
  • Legs
  • Accepts DOE, 222/Flat or 222/Fin
  • Vent: 1/4″ NPT
  • Inlet: 2″ NPT
  • Outlet: 2″ NPT
  • Drain: 3/4″ NPT

Hydronix MRH Series Stainless Steel Filter Housings

are ideal for most industrial/commercial applications with our welded leg design as a standard, (not ”optional”) feature, we eliminate the added expense to your application. MRH Series Housings are commonly used for pre-filtration for Reverse Osmosis (RO) systems, farms, food service, car washes, agriculture and many other uses.

 

Hydronix MRH Series Stainless Steel Filter Housings

are made with a high grade 304 or 316 Stainless Steel as standard. MRH Series housings easily accept Hydronix CB, SDC, SBC, SPC, SWC, DP and AR Series Cartridges. With a wide range of models, options, and filter cartridges, these units can easily meet most any requirement.

MRH SERIES SPECIFICATIONS
Part Number Description Flow Rate (GMP) Flow Rate (LPM) Case Qty Box Dimension (in) Weight (lbs) Weight (kgs)
150 PSI MRH-710-2 SS304 Filter Housing 10”, 7 Round, 150 PSI, 2”FNPT 35 132 1 16 x 16 x 30 66 29.94
MRH-720-2 SS304 Filter Housing 20”, 7 Round, 150 PSI, 2”FNPT 70 265 1 16 x 16 x 41 77 34.93
MRH-730-2 SS304 Filter Housing 30”, 7 Round, 150 PSI, 2”FNPT 105 397 1 16 x 16 x 50 88 39.92
MRH-740-2 SS304 Filter Housing 40”, 7 Round, 150 PSI, 2”FNPT 140 530 1 16 x 16 x 60 101 45.81
MRHS-710-2 SS316 Filter Housing 10”, 7 Round, 150 PSI, 2”FNPT 35 132 1 16 x 16 x 30 66 29.94
MRHS-720-2 SS316 Filter Housing 20”, 7 Round, 150 PSI, 2”FNPT 70 265 1 16 x 16 x 41 77 34.93
MRHS-730-2 SS316 Filter Housing 30”, 7 Round, 150 PSI, 2”FNPT 105 397 1 16 x 16 x 50 88 39.92
MRHS-740-2 SS316 Filter Housing 40”, 7 Round, 150 PSI, 2”FNPT 140 530 1 16 x 16 x 60 101 45.81

* 10”, 20”, 30” & 40”, 8 to 173 Round, 3” & 4” Flange available on special order.

 

FRPV SERIES ACCESSORIES
Part Number Description Case Quantity
PARTS MRH-7-ORING O-Ring for MRH Units 1
MRH-7-SPRING Spring for MRH Units 1
MRH-7-TOPPLATE Top Plate for MRH Units 1

 

Filter Housing Dimensions

Model A B C D E F G
Body
Width
Base to
Outlet
Base to
Inlet
Inlet to
cover
Cover Foot Print
Width
Handle to
Vent
710 9.13 in
232 mm
8.07 in
205 mm
14.37 in
365 mm
10.16 in
258 mm
2.56 in
65 mm
12.12 in
308 mm
5.5 in
140 mm
720 9.13 in
232 mm
8.07 in
205 mm
14.37 in
365 mm
20.19 in
513 mm
2.56 in
65 mm
12.12 in
308 mm
5.5 in
140 mm
730 9.13 in
232 mm
8.07 in
205 mm
14.37 in
365 mm
30.23 in
768 mm
2.56 in
65 mm
12.12 in
308 mm
5.5 in
140 mm
740 9.13 in
232 mm
8.07 in
205 mm
14.37 in
365 mm
40.27 in
1023 mm
2.56 in
65 mm
12.12 in
308 mm
5.5 in
140 mm